斷路器橋形觸頭鉚接方案的完善分析
陳佳成，柏華東，許海忠
（杭申集團 杭州之江開關股份有限公司，浙江 杭州 311234）
摘 要：橋形觸頭適用于抽屜式斷路器，用于斷路器本體和抽屜座快速離合，方便斷路器本體檢修或更換。介紹了框架斷路器橋形觸頭鉚接方案完善過程，從單軸鉚接、雙軸鉚接、粗定位+雙軸鉚接，再到自動鉚接，方案由簡及繁，定位穩定性不斷提高，對工人技能的依賴不斷弱化，表明完善的工藝方案對提高工效，提高產品質量，降低工人勞動強度有積極的影響。
關鍵詞：框架斷路器；橋形觸頭；鉚接方案；單軸鉚接；雙軸鉚接；自動鉚接
中圖分類號：TM561 文獻標識碼：B 文章編號：1007-3175(2020)10-0055-03
Perfect Analysis of Riveting Scheme for Bridge Contact of Circuit Breaker
CHEN Jia-cheng, BAI Hua-dong, XU Hai-zhong
（Hangshen Group Hangzhou Zhijiang Switchgear Co., Ltd, Hangzhou 311 234, China）
Abstract: Bridge type contact is suitable for withdrawable circuit breaker, which is used for fast-on and fast off of circuit breaker body and withdrawable unit, which is convenient for circuit breaker to be repaired or replaced. The improvement process of bridge contact riveting scheme for frame circuit breaker is introduced. From single axis riveting, double axis riveting, rough positioning + double axis riveting, and then to automatic riveting, from simple to complex, the positioning stability is constantly improved, and the dependence on worker skills is weakening. It shows that the perfect process scheme has a positive impact on improving work efficiency and product quality and reducing labor intensity.
Key words: frame circuit breaker; bridge contact; riveting scheme; single axis riveting; double axis riveting; automatic riveting
參考文獻
[1] 馮關水，戴水東，朱立明. 斷路器橋形觸頭結構改進與應用[J]. 電氣制造，2009(5)：56-58.
[2] 段艷艷，戴水東. 萬能式斷路器橋形觸頭結構的改進[J]. 江蘇電器，2008(5)：56-57.
[3] 陳佳成，姚立鋒. 加工中心氣動夾具設計[J]. 電工電氣，2019(5)：62-64.
[4] 柯武龍. 自動化機構設計工程師速成寶典：實戰篇[M]. 北京：機械工業出版社，2018.
