Abstract: The highest heating point of the EHV GIS bus often occurs in contacts and contact fingers. This paper used the finite element method to establish a coupled finite element solution model of the magnetic field, flow field, and temperature field of the 550 kV GIS bus with contacts and contact fingers. This research simplified the contact finger and calculated the power dissipation of components from different parts, such as bus conductor, contact, and finger contact. It took the contact finger as a heat source, coupled to flow field and temperature field solving model, furthermore figure out the bus temperature field distribution. In addition, it compared the calculation results to the data of the temperature rise test. The contact temperature error was 0.3%, the conductor temperature error was 1.04%, and the outside temperature error was 4%. The data verified the rationality and correctness of the simplified model of the contact finger. All in all this research has significance to the bus design and the temperature field of contact and contact finger.
Key words: conract; contact finger; GIS bus; coupled field; contact resistance; temperature field
參考文獻
[1] FUJINAMI H, TAKUMA T, KAWAMOTO T.Development of detection method with a magnetic field sensor forincomplete contact in gas-insulated switches and busconnecting parts[J].IEEE Transactions on Power Delivery，1995，10(1) ：229-236.
[2] PURUSHOTHAMAN S, DE LEON F.Heat-transfer model for toroidal transformers[J].IEEE Transactions on Power Delivery，2012，27(2) ：813-820.
[3] 黎斌.SF6 高壓電器設計[M]. 北京：機械工業出版社，2015.
[4] 紐春萍，強若辰，榮命哲，等. 彈簧觸指的穩態溫升仿真與實驗研究[J]. 高壓電器，2015，51(3) ：8-14.
[5] 馮慈璋，馬西奎. 工程電磁場導論[M] . 北京：高等教育出版社，2000.
[6] 吳曉文，舒乃秋，李洪濤，等. 基于光纖光柵的氣體絕緣開關母線溫度在線監測系統[J] . 電力自動化設備，2013，33(4)：155-160.
[7] 丁祖榮. 流體力學[M] . 北京：高等教育出版社，2003.
[8] 劉志剛，耿英三，王建華，等. 基于流場-溫度場耦合計算的新型空心電抗器設計與分析[J] . 電工技術學報，2003，18(6)：59-63.
[9] 路義萍，陳朋飛，鄧海燕，等. 某新型通風方式空冷汽輪發電機轉子三維溫度場[J] . 電工技術學報，2010，25(11) ：29-35.
[10] 趙鎮南. 傳熱學[M]. 北京：高等教育出版社，2008.
