變壓器繞組電容量測量方法分析
蔡統輝1，王飛2，周才康3
(1 三變科技股份有限公司，浙江 三門 317100；
2 蘇州電器科學研究院股份有限公司，江蘇 蘇州 215104；
3 浙江愛力浦科技股份有限公司，浙江 三門 317100)
摘 要：依據在變壓器繞組對地介質損耗因數測量項目中，同時測得的不同接線方式下繞組對地電容量的測量結果，通過闡述各繞組對地混聯電容量與各側繞組單獨對地電容量和相鄰繞組之間電容量的相互關系，分別對雙繞組變壓器和三繞組變壓器在不同繞組排列方式下各側繞組單獨對地電容量和相鄰繞組之間電容量的間接測量方法進行了分析，可知不同的繞組排列結構，各側繞組單獨對地的電容量和相鄰繞組之間的電容量并不相等。
關鍵詞： 變壓器 ；繞組；電容量；測量方法
中圖分類號：TM401+.1 文獻標識碼：A 文章編號：1007-3175(2024)03-0061-04
Measurement Method Analysis of the Capacitance
Between Transformer Windings
CAI Tong-hui1，WANG Fei2，ZHOU Cai-kang3
（1 Sanbian Sci-Tech Co., Ltd, Sanmen 317100, China;
2 Suzhou Electrical Apparatus Science Research Institute Co., Ltd,Suzhou 215104, China;
3 Zhejiang Ailipu Technology Co., Ltd, Sanmen 317100, China）
Abstract: According to the measurement results of the winding-to-ground capacitance under different wiring modes measured at the same time in the transformer winding dielectric dissipation factor measurement project. By expounding the relationship between the mixed capacitance of each winding-to-ground and the capacitance of each side winding-to -ground alone and the capacitance between adjacent windings,the indirect measurement methods of the capacitance of each side winding-to-ground alone and the capacitance between adjacent windings under different winding arrangement modes of double-winding transformer and three-winding transformer are analyzed respectively. It can be seen that the capacitance of each side winding to the ground alone and the capacitance between adjacent windings are not equal in different winding arrangement structures.
Key words: transformer; winding; capacitance; measuring method
參考文獻
[1] 賀以燕，楊治業. 變壓器試驗技術大全[M]. 沈陽：遼寧科學技術出版社，2006.
[2] 胡啟凡. 變壓器試驗技術[M]. 北京：中國電力出版社，2010.
