機械式有載分接開關滅弧方案的研究
沈艷濤，于群
山東科技大學 電氣與自動化工程學院，山東 青島 266590
摘 要：有載分接開關是變壓器在調壓過程中的重要器件。介紹了傳統的機械式有載分接開關及混合式有載分接開關的滅弧方案，總結了有載分接開關的改進過程,給出了三種改進方案，并進行了對比。指出全電力電子式有載分接開關將是未來的發展方向。
關鍵詞：變壓器；有載分接開關；機械式；混合式；滅弧
中圖分類號：TM564 文獻標識碼：A 文章編號：1007-3175(2015)08-0023-04
Arc Extinguishing Scheme Research on Mechanical On-Load Tap-Changer
SHEN Yan-tao, YU Qun
College of Electrical Engineering and Automation, Shandong University of Science and Technology, Qingdao 266590, China
Abstract: The on-load tap-changer is the important part for transformer in pressure regulating process. Introduction was made to the arc extinguishing scheme of traditional mechanical and mixed on-load tap-changer, the improved process of the on-load tap-changer was summarized and three kinds of improved schemes were given and compared. It is pointed out that the full electric power electronic type on-load tap-changer will be the trend of development.
Key words: transformer; on-load tap-changer; mechanical; mixed; arc extinguishing
參考文獻
[1] 張德明.變壓器分接開關選型與使用[M].北京：中國電力出版社，2006.
[2] 董忍娥.絕緣油質劣化對有載分接開關的影響[J].變壓器，2009，46(8)：50-54.
[3] 張品秀.基于晶閘管的有載自動調壓分接開關的研究[D].哈爾濱：東北農業大學，2009.
[4] Harlow J H, Stich F A.An arcless approach to step-voltage regulation[J].IEEE Transactions on Power Engineering Review，1982，PER-2(7)：47-48.
[5] Quinton G L.Advantages of an arcless voltage regulator[J].IEEE Transactions on Industry Applications，1984，IA-20(2)：425-428.
[6] 蘇澤光，李勁松，徐祖華.基于電力電子技術新型分接開關的發展[J].電氣應用，2005，24(4)：43-46.
[7] 高飛，李金忠，張書琦.新型變壓器有載分接開關綜述[J].電工電氣，2013(10)：1-5.
[8] 梁貴書，晏闊，高飛，等.變壓器混合式有載分接開關熄弧方法的仿真及試驗研究[J].高電壓技術，2014，40(10)：3156-3163.
